The XD15 is a very high-output, wide-bandwidth, two-way system equally suited to portable live sound applications, theatre sound and fixed installations. It features a high-specification 15” (380mm) low frequency drive unit and a 1.4” (35mm) exit compression driver mounted on a user-rotatable 80° x 50° constant directivity horn.
Features
- Versatile, multi-angle plywood enclosure
- Very high-output two-way system
- 15″ (380mm)/4″ (100mm) coil, ultra-long excursion, low-distortion neodymium LF driver
- 1.4″ (35mm) exit, titanium dome, neodymium HF compression driver
- Rotatable 80° x 50° horn for portrait or landscape orientation
- Switchable passive/bi-amp crossover
- 8 ohm nominal impedance
- Integral pole-mount and M8 rigging inserts
- Comprehensive mounting options and accessories
Applications
- Portable live sound reinforcement
- Theatre Sound
- Fixed Installations
- High power stage monitor
| TYPE | Very high-output, passive/bi-amp two-way system |
| FREQUENCY RESPONSE | 55Hz-18kHz ± 3dB -10dB @ 45Hz |
| DRIVERS |
|
| RATED POWER (1) |
|
| SENSITIVITY (2) |
|
| MAXIMUM SPL (3) |
|
| NOMINAL IMPEDANCE |
|
| DISPERSION (-6DB) |
|
| CROSSOVER | 1.75kHz switchable passive/bi-amp |
| ENCLOSURE | 68 litre, multi-laminate birch ply |
| FINISH | Textured black polyurea coating |
| PROTECTIVE GRILLE | Black perforated steel, Declon® backed |
| CONNECTORS | 2 x Neutrik® NL4 |
| INPUT CONNECTIONS |
|
| FITTINGS |
|
| DIMENSIONS |
|
| WEIGHT | 32Kg (70.5lbs) |
Martin Audio SXF115
The loudspeaker shall be a passive subwoofer capable of being ground-stacked or flown. Its transducer shall be a 15” ultra-long excursion driver in a bass reflex enclosure.
The on-axis frequency response shall be 50Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 136dB peak calculated at 1 metre.
Power handling shall be 800W AES, 3200W peak. Rated impedance shall be 4 ohms. The rear connector panel shall be fitted with two NL4 type connectors and the loudspeaker shall be operated in conjunction with a dedicated controller amplifier.
The loudspeaker enclosure shall be constructed from multi-laminate birch ply with a textured black polyurethane coating. The driver shall be protected by a perforated steel grille and the enclosure shall incorporate an integral rigging system to assemble an array suspended from a dedicated flying frame. The enclosure shall be fitted with a threaded pole-mount plate, bar handles and skids.
Dimensions including skids (W x H x D) shall be 509mm x 510mm x 574mm (20in x 20.1in x 22.6in). Dimensions including skids and wheelboard (W x H x D) shall be 500mm x 510mm x 725mm (19.7in x 20.1in x 28.5in). Weight shall be 45kg (99lbs).
The loudspeaker shall be the Martin Audio SXF115.
