Up 4S
Two-way passive, full-range, low profile 4” ceiling speaker
Features
- 4” coaxial driver
- Discreet size with shallow back can
- Unobtrusive design
- 8 ohm or 70/100V line operation
- Range of power taps
- Wide conical coverage pattern
- Integrated mounting hardware
Up 4S is a discreet, two-way, passive 4” speaker delivering consistent coverage and full frequency sound to a wide range of cost conscious, commercial environments from hotels and concourses to retail outlets, bars and restaurants.
Up 4S features a 4” (105mm) low frequency driver paired with a 0.7” (20mm) silk dome tweeter. It is suitable for both high quality speech and music reproduction.
The wide 150° conical coverage of Up 4S makes it particularly suitable for low ceilings and reduces the number of speakers required for even coverage leading to a reduction in installation cost. A shallow steel back can allows installation in ceilings with minimal cavity depth. An integral fixing system is included to achieve a simple and clean installation. Up 4S has a steel back, perforated steel grille and finished in neutral white.
Each Up 4S can be run on a series of 70 or 100 Volt taps or at low impedance. Tap selection is via a rotary switch behind the removable grille.
SmartAmps or Zone will provide optimal performance and loudspeaker protection. When coupled with the Zone series, a ZonePad and the WebApp makes setting up a system and end user control simple and intuitive.
TYPE | Two-way, full range, passive, ceiling speaker |
FREQUENCY RESPONSE (with preset) | 110Hz – 18kHz ± 3dB -10dB @ 85Hz |
DRIVERS | LF: 4” (105mm), Polypropylene injection moulded HF: 0.7″ (20mm) Silk Dome |
RATED POWER | 15W (AES) 30W (Peak) |
NOMINAL IMPEDANCE | 8Ω |
SENSITIVITY (1W/1m) | 86dB |
MAXIMUM SPL | 98dB (cont), 101dB (peak) |
CROSSOVER | 3.5kHz passive |
RECOMMENDED HIGH-PASS FILTER | 24dB/octave @ 85Hz |
TRANSFORMER TAPS @ 70V | 8,4,2,1,0.5W |
TRANSFORMER TAPS @ 100V | 8,4,2,1W |
DISPERSION (-6dB) | 150˚ conical |
BACK CAN | Zinc-plated Steel |
BAFFLE | ABS |
PROTECTIVE GRILLE | Perforated steel with cloth backing |
UL94-V0 UL94-5VB | |
CONNECTORS | 4 Pin Euroblock with link out |
FITTINGS | C-ring support backing plate |
DIMENSIONS (inc. Grille) |
(Ø) 202mm x (D) 144mm (Ø) 7.95” x (D) 5.67” |
CUT-OUT DIAMETER |
178mm (7.01”) |
WEIGHT | 2.2kg (4.9lbs) |