The SX110 is an slimline subwoofer designed for applications that call for increased impact and low frequency performance in a visually unobtrusive enclosure. Its very small size makes it perfectly suited to installed sound applications where space is limited such as under banquette seating.
Features
- Ultra-Compact, single driver, direct radiating subwoofer
- 12” (300mm) driver with 3” (75mm) voice coil
- Water resistant cone
- Large ports for reduced air noise
- Perforated steel grille
- Black or white standard colour options
- Integrated flying points
Applications
- Live Music Clubs and Bars
- Nightclubs
- Bars and Restaurants
- Museums and AV Spaces
- Convention Centres
- Hotels
- Retail Outlets
- Leisure Centres
- Houses of Worship
| TYPE | Compact, single driver, direct radiating subwoofer |
| FREQUENCY RESPONSE (1) | 48Hz-150Hz ± 3dB -10dB @ 35Hz |
| DRIVER | 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone |
| RATED POWER (2) | 400W AES, 1600W peak |
| SENSITIVITY (10) | 100dB |
| MAXIMUM SPL (9) | 126dB continuous, 132dB peak (half space) |
| NOMINAL IMPEDANCE | 8Ω |
| DISPERSION (-6DB) | Omnidirectional |
| CROSSOVER | 80-120Hz active |
| ENCLOSURE | 52 litre, Plywood |
| FINISH | Black or white textured paint |
| PROTECTIVE GRILLE | Black or white perforated steel |
| CONNECTORS | 2 x NL4 |
| PIN CONNECTIONS | Left to right: Input+, Input -, Link -, Link+ |
| FITTINGS | 12 x M10 inserts |
| DIMENSIONS | (W) 487mm x (H) 390mm x (D) 410mm (W) 19.2ins x (H) 15.4ins x (D) 16.1ins |
| WEIGHT | 21.5kg (47.3lbs) |
Martin Audio SX112
The loudspeaker shall be an ultra-compact subwoofer consisting of one 12” reflex-loaded, long-excursion, low frequency transducer.
The on-axis frequency response shall be 48Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 132dB peak calculated at 1 metre. Power handling shall be 400W AES, 1600W peak. Rated impedance shall be 8 ohms. The loudspeaker shall be operated in conjunction with a dedicated electronic controller.
The input connector shall be a low-profile 20A push-lock type. The enclosure shall be constructed plywood and the driver shall be protected by a perforated steel grille.
Dimensions (W x H x D) shall be 487mm x 390mm x 410mm (19.2in x 15.4in x 16.1in). Weight shall be 21.5kg (47.3lbs).
The loudspeaker shall be the Martin Audio SX112.
