A completely new amplifier design from FFA . . . Designed to give exceptional audio for live performance sound
Features at a glance
- Exceptional sound quality
- G2 DSP option
- High Power efficiency and cool running
- Rugged Tour class Aluminium construction
- Light weight – 10 kg
- FFA Class D PWM
- High current switch mode power supply designed to give continuous power
- Superb limiter
- 4 XLR analogue audio inputs
- 4 XLR parallel outputs
- Bi amp Neutrik® speakON outputs
- Signal Link through
- Neutrik® powerCON power input
- PSU soft start
- Hand built & designed in Hertfordshire, England
- 5 year factory warranty
Suitable Applications
Exceptional sound for all loudspeaker systems – bass is powerful, fast and tight – mids and high frequency are natural and open.
Stage monitor performance will give super clear vocal sound.
Vocal and high frequency inteligibility for large scale systems is superb.
Ideal for any night venue, theatre, cruise ship, AV systems, Cinemas, Conferences
temporary audio installation at summer music festivals
Power Ratings |
FFA – 8004 – 4 x 1000W 8 Ohm, 4 x 2000W 4 Ohm |
Gain | 32 dB |
THD | Typical 0.05 4 Ohm 1kHz THD+N |
Frequency Response |
20Hz – 20kHz +- 0.5dB |
Controls | 40 Point Potentiometer per channel, power on switch |
Indicators | signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up |
Load Protection |
DC on output, side chain TCA clip limiter circuit |
Amplifier Protection |
Short circuit, current overload, thermal shutdown, high frequency stability circuit |
Audio Signal Inputs |
Balanced Neutrik® Female XLR input connected Pin 1 – GND, Pin 2 – Hot +, Pin 3 – Cold – . XLR Male signal throughput each channel |
Audio Signal Outputs |
Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system for example stage monitor system |
Power Requirement |
1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC 120V (configured at factory) |
System Cooling |
High CFM 80mm fan with proportional signal speed control. Rear to front airflow |
Dimensions | 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19″ rack mount enclosure |
Weight | 10 kg |