The CDD15-WR is a very high-power, weatherised, passive two-way system designed for outdoor installations that demand the ultimate in sonic performance from a single enclosure and suitable for applications where it will be subject to changing environmental conditions, but sheltered from direct exposure to the elements.
Features
- Compact, CDD™ passive two-way system
- Coaxial Differential Dispersion™ technology
- Elegant UPM Formi composite enclosure
- Outdoor operation when sheltered from direct exposure to elements
- Operating temperature -20°C to +70°C
- Environmentally tested to meet IP54
- User-rotatable coaxial drive unit
- Vertical and horizontal mounting options
- Screw-free water and particle resistant grille
- 8Ω nominal impedance
- Integral inserts for eyebolt suspension
- Black or white standard colour options
Applications
- Outdoor Restaurants
- Bars
- Hotel Areas
- Nearfield Systems in Outdoor Stadia
- Transport Hubs
- Concourses and Theme Parks
TYPE | High-output, Coaxial Differential Dispersion passive two-way system |
FREQUENCY RESPONSE (5) | 55Hz-18kHz ± 3dB -10dB @ 45Hz |
DRIVER | LF: 15” (380mm)/3” (75mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1.4” (36mm) exit/3” (75mm) voice coil, titanium dome compression driver |
RATED POWER (2) | 400W AES, 1600W peak |
SENSITIVITY (8) | 100dB |
MAXIMUM SPL (9) | 126dB continuous, 132dB peak |
NOMINAL IMPEDANCE | 8Ω |
DISPERSION (-6DB) | 100˚-60˚ horizontal, 60˚ vertical (user-rotatable) |
CROSSOVER | 1.6kHz passive |
ENCLOSURE | 68 litre, composite material |
FINISH | Black or white as standard |
PROTECTIVE GRILLE | Zinc plated mild steel with powder coated finish and weatherised backing |
ENVIRONMENTAL | Rated at IP54 |
CONNECTORS | Low profile 20A push-lock, weatherproof input panel cover with cable gland |
PIN CONNECTIONS | Left to right: Input+, Input -, Link -, Link+ |
FITTINGS | 10 x M8 fly points |
DIMENSIONS | (W) 429mm x (H) 691mm x (D) 413mm (W) 16.9ins x (H) 27.2ins x (D) 16.3ins |
WEIGHT | 28.3kg (62.4lbs) |
Martin Audio CDD15-WR
The loudspeaker shall be a passive, two-way system ultilising Coaxial Differential Dispersion technology. Its transducers shall consist of a reflex-loaded 15” low frequency driver with a water-resistant cone and a coaxially-mounted 1.4” exit high frequency compression driver. The HF driver shall be loaded by a static waveguide that merges with moving waveguides added to the cone of the low frequency driver to define the HF horn geometry.
The coaxial driver shall be user-rotatable to enable vertical or horizontal operation as required by the application. Horizontal dispersion shall vary from 100° to 60° and vertical dispersion shall be 60°. The on-axis frequency response shall be 55Hz-18kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 132dB peak calculated at 1 metre. Power handling shall be 400W AES, 1600W peak. Rated impedance shall be 8 ohms.
The input connector shall be a low-profile 20A push-lock type with a waterproof cover incorporating a cable gland. Low and high frequency sections shall be integrated by an internal 1.6kHz passive network. For optimal performance the loudspeaker shall be operated in conjunction with a dedicated electronic controller.
The enclosure shall be made from rigid composite material and fitted with threaded inserts with stainless steel screws for wall and ceiling mounting. The drivers shall be protected by a powder coated, zinc plated steel grille with Declon® backing and a secondary grille with hydrophobic mesh. The loudspeaker shall meet the IP54 environmental rating.
Dimensions (W x H x D) shall be 429mm x 691mm x 413mm (16.9in x 27.2in x 16.3in). Weight shall be 28.3kg (62.4lbs).
The loudspeaker shall be the Martin Audio CDD15-WR.